Menu
Print |

Corrosion Inhibitive Sealants

PR-2870 Class B Non-Chromate Corrosion Inhibitive Sealant

PPG Aerospace has completed qualification of all three grades of its non-chromate corrosion-inhibiting sealant PR-2870 that provides commercial, general aviation and military aircraft manufacturers as well as maintenance, repair and overhaul shops with faster cure to reduce application cycle time for significant cost savings. Learn more

PR-2870 Class B is a light weight, non-chromate corrosion inhibitive sealant. It has a service temperature range from -80°F (-62°C) to 250°F (121°C), with intermittent excursions up to 300°F (149°C). This material acts as an effective corrosion inhibitor when used with aluminum alloys or with dissimilar metals. The cured sealant maintains elastomeric properties after limited exposure to both jet fuel and aviation gas.

PR-2870 Class B as a two-part, epoxy cured Permapol® P-3.1 polythioether compound. The uncured material is a low sag, thixotropic paste suitable for application by extrusion gun or spatula. It cures at room temperature to form a resilient sealant having excellent adhesion to common aircraft substrates.

Watch the video below to see PPG PR-2870 Corrosive Inhibitive Sealant.

If you have difficulty, you can view the video here
 
 

Specifications

  • * Below is a partial specification list - for additional information - contact AerospaceSealantsInfo@ppg.com
  • MIL-PRF-81733 - Type II Class 2 Grade B - NAVAL AIR WARFARE CENTER

Packaging Options

PR-2870 Class B is supplied in a two-part Semkit® package or pre-mixed and frozen cartridge.